FlatPlateSolarCollector.GetHeatTransfer メソッド |
太陽熱集熱器の集熱量を計算する
名前空間: Popolo.HVAC.SolarEnergy
アセンブリ: Popolo (in Popolo.dll) バージョン: 2.0.0.0 (2.0.0.0)
構文C#
public static double GetHeatTransfer( double skyTemperature, double airTemperature, double directNormalRadiation, double diffuseRadiation, double waterFlowRate, double waterInletTemperature, double airThickness, double glassEmissivity, double panelEmissivity, double windSpeed, double insulatorThickness, double insulatorThermalConductivity, double surfaceArea, double tubePitch, double innerDiameter, double outerDiameter, double panelThickness, double panelThermalConductivity, double cosTheta, double glassTransmittance, double glassReflectance, double panelAbsorptance, out double panelTemperature, out double glassTemperature, out double waterOutletTemperature, out double meanWaterTemperature, out double efficiency )
パラメーター
- skyTemperature
- 型: System.Double
天空の温度[C] - airTemperature
- 型: System.Double
空気温度[C] - directNormalRadiation
- 型: System.Double
法線面直達日射量[W/m2] - diffuseRadiation
- 型: System.Double
天空日射量[W/m2] - waterFlowRate
- 型: System.Double
水量[kg/s] - waterInletTemperature
- 型: System.Double
入口水温[C] - airThickness
- 型: System.Double
空気層の厚み[m] - glassEmissivity
- 型: System.Double
ガラスの放射率[-] - panelEmissivity
- 型: System.Double
パネルの放射率[-] - windSpeed
- 型: System.Double
外部風速[m/s] - insulatorThickness
- 型: System.Double
断熱材厚み[m] - insulatorThermalConductivity
- 型: System.Double
断熱材熱伝導率[W/(mK)] - surfaceArea
- 型: System.Double
パネル面積[m2] - tubePitch
- 型: System.Double
集熱媒体管の設置間隔[m] - innerDiameter
- 型: System.Double
集熱媒体管の内径[m] - outerDiameter
- 型: System.Double
集熱媒体管の外径[m] - panelThickness
- 型: System.Double
パネル厚み[m] - panelThermalConductivity
- 型: System.Double
パネルの熱伝導率[W/(mK)] - cosTheta
- 型: System.Double
入射角の余弦 - glassTransmittance
- 型: System.Double
ガラスの日射透過率[-] - glassReflectance
- 型: System.Double
ガラスの日射反射率[-] - panelAbsorptance
- 型: System.Double
パネルの日射吸収率[-] - panelTemperature
- 型: System.Double
パネルの温度[C] - glassTemperature
- 型: System.Double
ガラスの温度[C] - waterOutletTemperature
- 型: System.Double
出口水温[C] - meanWaterTemperature
- 型: System.Double
平均水温[C] - efficiency
- 型: System.Double
集熱効率[-]
戻り値
型: Double集熱量[W]
関連項目